Injection moulding machine Screw Barrel
Specification:
Screw diameter: Φ20mm-Φ220mm
Mould clamping force:250T-3200T
Shot weight:30G-30000G
According to different material and plastic products to design different screw structure ,compress rate and L/D!
According to different material and plastic products to design different Barrel with exhaust system and IKV force load system!
| Technical Parameter |
Base Material | 1)38CrMoAlA(JIS SACM645);2)Cr12MOV(JIS SKD-11) ;
3)4Cr5MoSiV1(JIS SKD-61) ;4)42CrMo(AISI 4140) |
| Bimetallic Alloy Materials | 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy
3)Co-based alloy 4)NiCo-based alloy
5) Tungsten Carbide /Wolfram carbide |
| Double-alloy level | Level A - containing Tungsten of 40%
Level B - containing tungsten of 25%
Level C - containing tungsten of 15% |
| Surface Treatment | Heat Treatment
High Frequency Treatment
Nitriding treatment(120 Hours):
Depth of Nitrided Layer: 0.5-0.8 mm
Hardness of Nitrided Layer: 900-1020Hv (HRC56°-65°)
Hard Chrome Plating treatment:
Thickness of Hard Chrome Plating Layer: 0.05-0.10mm
Hardness of Hard Chrome Plating Layer: ≥950HV
Nickel alloy plating.treatment:
Bimetallic Barrel/Cylinder: Centrifugal Casting (Inlay Alloy)
Bimetallic Screw: Plasma Alloy Coating Spraying
Depth of Bimetallic Layer: >2mm
Hardness of Bimetallic Layer: HRC55°-72°
Spraying corrosion wear-resisting dual metal layers |
| Basic information | Roughness of the surface:Ra0.4um
Linearity of the screw: ≤0.015mm
Linear axis limit: ≤0.02mm
Hardness after Hardening & Tempering: HB240-280
Fragility of Nitration:≤Two class |
| Material Application | 1)General Plastics
2)ABS,PA,PC,PE,PET,PP,PS,EVA,PU,PVC,U-PVC,etc
3)PA + GF(Glass Fiber)
4)Flame-resistant Reinforced Plastics
5)Modified Engineering Plastics
6)All kinds of Mixed Recycled Material(in Scrap or Granule), PVC + 30% CaCo3, etc |
Our factory manufactures with high-quality material, applying the method of hardening and tempering and nitriding, thus it enjoys the characteristics of long working life, wear resistance, and anti corrosion. Besides, the technique of hard alloy spraying or chrome plating can be used on the working surface of screw, which will make it have better using effectiveness.
The production of screw barrel type:
1. injection screw barrel, Injection Molding Screw barrel,screw tips/screw nozzle,
2. Single Screw Barrel
3. Twin Screw Barrel
4. Twin Conical Screw And Barrel(Co-rotating,Counter)
5. Twin Parallel screw and barrel Co-rotating,Counter)
6. High wear Resistant screw and barrel
7. Screw barrel Assembly parts
8. Bimetallic Screw Barrel
9. rubber screw barrel
10.Pin screw barrel
11.Force Feed Screw Barrel
12.Blocks screw
13.Gear box
14.screw barrel for blowing molding machine
Contact Now
